Top 10 common forklift mishaps ， forklift operation should take note of these matters ！.

Top 10 common forklift mishaps ， forklift operation should take note of these matters ！.

Blog Article

Don't ignore the forklift at the workplace. If the operation is not good, there will certainly be major mishaps in mins, and there are many crashes involving forklifts.

Instance 1: The forklift freight blocked the driver's view, and the person ahead could not be located, causing a rolling mishap.
Case 2: In order to maintain the equilibrium of the forklift when lifting hefty items, the workers utilized their body weight as the counterweight, which nearly caused casualties.
Instance 3: The width of the forklift freight goes beyond the allowed size of the path and holds on the roadside shelf, which virtually causes an crash.
Situation 4: Forklift is speeding up and rolls over during a turn.
Instance 5: The forklift vehicle driver did not see the pedestrian, and the pedestrian did not notice the forklift.
Case 6: The forklift lifts the employees unlawfully, the forklift motorist does not wear the seat belt, the forklift lifter falls and the vehicle driver is squashed when the forklift surrender.
Instance 7: The forklift chauffeur did not wear a safety belt and fell from the automobile when it surrendered and was crushed.
Forklift operation should pay attention to these matters ：.

Start.
1. Before beginning, observe the surroundings, and after verifying that there are no obstacles that impede the safety of driving, honk the horn first and afterwards begin.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) scale need to be safe prior to starting.
3. When the forklift starts with a load, the motorist should initially verify that the load is steady and trustworthy.
4. The start should be slow-moving and steady.

Driving.
1. When driving, the height between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the mast needs to be slanted in reverse. .
2. Do not raise the fork too high when driving. When getting in and leaving the work site or while driving, take care that there will certainly be no obstacles overhead. When the load is taking a trip, the fork should not be increased expensive, which will certainly impact the stability of the forklift. .
3. After discharging, the fork should be lowered to the regular driving setting prior to driving. .
4. When transforming, if there are pedestrians or cars close by, the driving signal needs to be issued first. High-speed doglegs are banned. High-speed sharp turns will trigger the lorry to lose lateral stability and tip over. .
5. When the forklift is downhill, it is strictly restricted to switch off the fire and slide, and it is forbidden to brake all of a sudden while driving with tons unless there are unique circumstances.
6. When the forklift is running, it must follow the website traffic rules in the manufacturing facility and have to keep a particular security range from the automobile ahead. .
7. When the forklift is running, the lots has to remain in the lowest setting that does not impede the driving, and the gantry should be correctly slanted back. The load will not be elevated except when stacking or loading. .
8. The elevation of the load must not block the driver's sight. In special situations, when the thing influences the forward vision, drive at a low rate when turning around.
9. It is prohibited to activate the ramp, nor to drive across the ramp. .
10. The secure driving speed of the forklift in the factory area is 5 km/h, and it must drive securely at a reduced speed when entering the production workshop location. .
11. When the forklift is raised, raised or driven, it is restricted for workers to stand on the fork to hold products and play a balancing duty. .
12. If troubles are located, they will be repaired and reported in a timely manner, and they will never operate with diseases Electric Forklift Truck for Warehouse or conceal them.

filling and unloading.
1. When fork-loading items, the distance between the two forks should be readjusted as required to make the lots of the two forks well balanced and not manipulated, and one side of the item must protest the rack. .
2. It is prohibited to work with a single fork or use a fork top or pull. In special circumstances, security warning signs need to be established to advise surrounding pedestrians. .
3. In the process of loading and dumping items, the forklift should be braked with the brake. .
4. The speed of the car must be slow-moving and stable. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled objects and injure individuals. .
5. When making use of a fork to fork the goods, the fork should be as deep as possible under the tons, and it ought to be noted that the fork idea should not touch other items or objects. The tons needs to be supported with very little back tilt of the gantry to make sure that the load does not move in reverse. The pole can be slanted onward a little when the load is lowered to enable very easy positioning of the tons and removal of the forks. .
6. It is restricted to fork goods at high speed and hit difficult items with the fork head. .
7. When the forklift is working, it is restricted for individuals to stand around the fork, so as to avoid the collapse of the goods and hurt people. .
8. Overloading is forbidden, and it is Electric Forklift Truck for Warehouse banned to make use of forks to lift personnel to take part in high-altitude procedures to avoid high-altitude falling mishaps. .
9. It is not enabled to use the brake inertia to slip, place, round or roll objects. .
10. It is not allowed to make use of forks to choose, turn pallet dump.

Leaving .
1. It is restricted to leave the forklift when the products on the fork are in the air. Prior to leaving the forklift, you should dump the goods or reduced the fork framework.
2. Draw the emergency brake handle to dead or dispirit the hand brake button.
3. The engine is turned off and the power is removed. (Except for special scenarios, such as the vehicle driver does not leave the lorry's line of sight and does not surpass 1 min).
4. Remove the secret. .

Forklift Operation Precautions.
1. Before and after the forklift procedure, the look should be inspected, and fuel, lubing oil and air conditioning water must be added.
2. Examine the security performance of starting, running and braking.
3. Examine whether the lights and horn signals are complete and efficient.
4. Throughout the procedure of the forklift, examine whether the pressure and temperature level are normal.
5. After the forklift is running, the exterior leak must additionally be examined and the seals need to be replaced in time.

Forklift Safety Operation Specifications.
1. You must inspect before leaving the automobile;.
2. When you run into somebody before you during driving, you need to send a signal at a distance of 5 m;.
3. The driving speed in the factory does not surpass 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming need to not be as well sharp to prevent the tendency of " cost-free switching";.
6. Adding and down the slope ought to be sluggish and uniform, and no turning on the slope is allowed.
7. Do not drive throughout the slope. When the slope is more than 10%, the car should be driven backwards when declining;.
8. When the forklift personnel carry the goods and move on, if they run into huge or hefty items and most likely to the chauffeur's view, they must take the turning around exercise
.
The "Eight Prohibitions" should be followed in the procedure.
1. Solitary fork operation is not enabled.
2. It is not permitted to raise the goods for cross country driving.
3. It is not enabled to pick up the goods by turning over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and other dangerous chemicals with forks.
5. It is not permitted to utilize inertia pressure to pick up the goods.
6. It is not enabled to use stopping force to exile round or easy-to-roll objects.
7. It is not enabled to bring people to work with the pallet or fork, and it is purely forbidden to stand under the fork after the fork is raised.
8. Do not drive side to side on slopes
.
Car park is not permitted under the list below problems.
1. Contours, narrow roads, train crossings;.
2. Areas with a longitudinal slope greater than 5%.
3. When there is an barrier on one side of the road, the contrary side of the section with the very same length as the barrier must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844